DCOIT-99 biocide has been specifically designed to meet the requirements for use in acetoxy silicone sealants, the active ingredient, 4.5-Dichloro-2-n-octyl-4-isothiazolin-3-one (DCOIT), shows excellent efficacy against fungi and bacteria under the standard ISO 846 method B test conditions including Aspergillus, Alternaria and Candida species and accelerated leaching. Due to the very low solubility of DCOIT, the leaching from silicone sealants is minimal and long term protection is provided.
Broad spectrum efficacy, low leaching and rapid degradation of the very low concentrations of the active ingredient released into the environment during performance and easy incorporation into the sealant render this product aunique solution for the fungicidal protection of silicone sealants. DCOIT does not contain any metals or arsenic compounds. As part of Ozzie' commitment to Responsible Care, extensive toxicological studies have been performed, showing that the active ingredient is non-mutagenic and non-teratogenic.
Chemical and Physical Properties
The active ingredient is:4,5-dichloro-2-n-octyl-4-isothiazolin-3-one (DCOIT)
CAS Reg. N°: 64359-81-5 EINECS: 2648438
These properties are typical but do not constitute specifications
Yellow-white or white powder
DCOIT-99 is miscible with a variety of non-polar solvents. DCOIT-99 is non-miscible with water. The solubility of the active ingredient in water is <10 ppm.
Directions for Use
DCOIT-99 biocide is a liquid product and is dosed either using automated metering systems or by hand-weighing. To ensure adequate mixing add the biocide at the compounding stage of the silicone sealant.
DCOIT-99 should be dosed in the range of 0.1 kg - 1 kg as supplied for a one tonne batch, which is equivalent to 10 ppm to 100 ppm active ingredient.
Please refer to the safety data sheet for further detail on this product and for precise handling instructions.
DCOIT-99 can easily be incorporated into the sealant at the compounding stage. Due to the biocidal nature of the product, protective clothing is to be worn while handling the product. Any handling or use that could create aerosols is to be avoided.
The processing and use of industrial chemicals require adequate technical and professional knowledge.In general, avoid eye and skin contact, wear safety goggles, gloves and protective clothing. In case of eye or skin contact despite precautionary measures, wash immediately and thoroughly with plenty of warm water and obtain medical attention.
Packaging & Shipping
Ozzie technical service laboratories provide a variety of sterilization efficiency tests which can help customers solve issues in regard to anti-corrosion, anti mildew, algae and sterilization problems.
Factory cleaning consultation and field support Good production environment is an important prerequisite for quality assurance, Ozzie provides the following services: 1.Inspect the factory production environment and test the degree of contamination in the production process; 2.Help to establish a biological laboratory for testing of raw materials, water and sterile conditions of the finished product; 3.Complete test method; 4.To provide targeted lectures and training of technical personnel.
Physical and chemical analysis 1.Physical phase solubility experiment; 2.Chemical analysis; 3.Process support.
Welcome to Ozzie Chemical(Dalian) Co.,Ltd.
Ozzie Chemical is the leading supplier of biocides in Aisa.We mainly supply isothiazolinone series biocides:CMIT/MIT,MIT, OIT, DCOIT,BIT. Your reliable biocides partner in China.
Quality products combined with outstanding technical support and high regulatory expertise - that's what distinguishes Ozzie Material Protection Products.
We provide best-in-class products, service and knowledge to our customers, including: Formulation Expertise, Preservation and Dry Film Fungicides,Water Treatment Chemistries, Sanitizing and Disinfection Chemistries, Regulatory and Toxicology Research Expertise. We create added value by appreciating the needs of our customers - with competitive and innovative solutions.
Q: What’s your MOQ?
A: Usually, our MOQ is 500KG, so in this situation, we can send large products to you by sea, because ocean freight is much cheaper than international express cost. But if you really need a few quantity of chemicals and cannot find the suppliers locally, we can also help you.
Q: How can I get a free sample?
A: Kindly send us your address, free samples can be provided for you by FedEx, DHL, TNT. Usually the quantity of free sample is 100-500g (small bottle ), and it’s enough to test. Or if you need really more, it’s also ok. But pls note, the express cost is paid by the buyers.
Q: Can you manufacture the Customization product?
A:Please provide the specification of this product you request , after the evaluation , we will feedback to you.
Q: What documents you provide?
A: Usually, we provide Commercial Invoice, Packing List, Bill of loading, COA ,Origin certificate. If your markets have any special requirements, let us know.