• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Classification: Chemical Auxiliary Agent
  • CAS No.: 26172-55-4/2682-20-4
  • Other Names: ACTICIDE HF
  • MF: C8H9ClN2O2S2
  • EINECS No.: 247-500-7
  • Purity: 1.5%
  • Place of Origin: Shandong, China (Mainland)
  • Type: preservative
  • Usage: Coating Auxiliary Agents, preservatives for paints
  • Brand Name: OZZIE CHEMICAL
  • Model Number: CMIT/MIT 1.5F
  • Appearance: Bluish or bluish green, clear liquid
  • Active Ingredient: 1.5%chloromethylisothiazolinone/methylisothiazolinone
  • pH: 2-5
  • Specific Gravity (g/ml) at 25°C: 1.029 ± 0.01
  • performance 1: equivalent to ROCIMA 623
  • performance 2: equivalent to BIOPOL TK
  • performance 3: equivalent to Proxel 106
  • performance 4: equivalent to Nuosept 23SC
  • Name: isothiazolinone mixture Combination of CIT/MIT 1.5% and formaldehyde

Packaging & Delivery

Packaging Details 25Kg per drum, 200Kg per drum or 1000Kg per IBC drum
isothiazolinone mixture Combination of CIT/MIT 1.5% and formaldehyde
Delivery Time Shipped in 10 days after payment
 
Product Description

 

 

CMIT/MIT 1.5F

In-can Preservation for Paints and Other Technical Products
Chemical Name: chloromethylisothiazolinone/methylisothiazolinone
CAS No: 26172-55-4/2682-20-4
General                                                                                                          
CMIT/MIT-1.5F Biocide is an active ingredient preparation of chloromethylisothiazolinone/
Methylisothiazolinone and formaldehyde to preserve paints, binder dispersions and other technical products.
The performance is similar to ROCIMA™ 623,ACTICIDE® HF,Proxel™ 106 Preservative,NuoseptTM 23SC,BIOPOL TK.
Typical Properties
These properties are typical but do not constitute specifications
AppearanceBluish or bluish green, clear liquid
Active Ingredient1.5%chloromethylisothiazolinone/methylisothiazolinone
pH-value, as is2-5
Specific Gravity (g/ml) at 25°C1.029 ± 0.01
Miscibility/Solubility
Forms clear solutions in all proportions with water, low alcohols, glycols, and glycol ethers .
Compatibility
CMIT/MIT-1.5F is compatible with most common binders. It is generally advisable to check
compatibility prior to any application to a special case.
Stability
Temperature: up to 40°C (short periods to 60°C), pH range: 4 to 9
Application and Activity
CMIT/MIT-1.5F is a wet state preservative with a very wide application field such as paints,
plasters, adhesives, inks, dispersion and emulsion binders and aqueous technical products
CMIT/MIT-1.5F has a broad spectrum of activity. It is effective against gram-positive and
gram-negative, aerobic and anaerobic bacteria as well as against mould and yeast.
Dosage
The number of technical products being preserved with CMIT/MIT-1.5F is increasing steadily and
it is not always possible to predict its suitability. The optimum use should be established by a preliminary
experiment. In critical cases, predilution with water is often helpful. The optimum dosage rate of CMIT/MIT-1.5F
depends upon the degree of contamination and the susceptibility of the product to be preserved.
Occasionally, the degree of contamination exhibits seasonal fluctuation, so that a periodical determination
of germ counts can assist in choosing the optimum dosage rate.Therefore, the ranges of concentrations listed below should be taken as general guidelines only
                      :                                                                                                                                            
Binders 0.05 - 0.3%
                                                                                                                                                                   
Other products 0.05 - 0.15%
                                                                                                                                                                   
Storage, Handling and Disposal
Please refer to the Safety Data Sheet of this product for precise handling instructions.
In general, avoid eye and skin contact, wear safety goggles, gloves and protective clothing.
In case of eye or skin contact despite precautionary measures, wash immediately and
thoroughly with plenty of warm water and obtain medical attention.
The legal requirements prevailing in your country, especially on working hygiene and in the
avoidance of accidents, must be observed.
CMIT/MIT-1.5F Biocide should be stored in closed original containers in a cool place, but not
below 0°C. At temperatures below 0°C solidification of the product may occur. If the product
does freeze, allow it to return to room temperature and it will turn liquid again. Bioactivity is unaffected by freezing and melting.
 
Packaging & Shipping

 

Our Services

Ozzie technical service laboratories provide a variety of sterilization efficiency tests which can help customers solve issues in regard to anti-corrosion, anti mildew, algae and sterilization problems.


Factory cleaning consultation and field support
Good production environment is an important prerequisite for quality assurance, Ozzie provides the following services:
1.Inspect the factory production environment and test the degree of contamination in the production process;
2.Help to establish a biological laboratory for testing of raw materials, water and sterile conditions of the finished product;
3.Complete test method;
4.To provide targeted lectures and training of technical personnel.


Physical and chemical analysis
1.Physical phase solubility experiment;
2.Chemical analysis;
3.Process support.

 

Company Information

Welcome to Ozzie Chemical(Dalian) Co.,Ltd.

 

Ozzie Chemical is the leading manufactuer of biocides in the whole Aisa.We mainly produce isothiazolinone series biocides:CMIT/MIT,MIT, OIT, DCOIT,BIT. Your reliable biocides partner in China.


Quality products combined with outstanding technical support and high regulatory expertise - that's what distinguishes Ozzie Material Protection Products.


We provide best-in-class products, service and knowledge to our customers, including: Formulation Expertise, Preservation and Dry Film Fungicides,Water Treatment Chemistries, Sanitizing and Disinfection Chemistries, Regulatory and Toxicology Research Expertise. We create added value by appreciating the needs of our customers - with competitive and innovative solutions.

 

 

 

 

FAQ

Q: What’s your MOQ?


A: Usually, our MOQ is 500KG, so in this situation, we can send large products to you by sea, because ocean freight is much cheaper than international express cost. But if you really need a few quantity of chemicals and cannot find the suppliers locally, we can also help you.

 

Q: How can I get a free sample?


A: Kindly send us your address, free samples can be provided for you by FedEx, DHL, TNT. Usually the quantity of free sample is 100-500g (small bottle ), and it’s enough to test. Or if you need really more, it’s also ok. But pls note, the express cost is paid by the buyers.

 

Q: Can you manufacture the Customization product?


A:Please provide the specification of this product you request , after the evaluation , we will feedback to you.

 

Q: What documents you provide?


A: Usually, we provide Commercial Invoice, Packing List, Bill of loading, COA ,Origin certificate. If your markets have any special requirements, let us know.

 

Q: What is loading port?


A: Usually is Shanghai or Qingdao port.

 

Q: What is the payment terms?
A: L/C ,T/T.

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Trading Company
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $27,000
Learn More